Change The Time; Measure Time - Nokia 2128i User Manual

Bravo_R210_Verizon_080205.fm Page 70 Monday, August 8, 2005 8:59 AM
O r g a n i z e r
2. Enter the time (in hh:mm format), and select OK.
3. Enter a note for the timer, and select OK.
The icon appears in the standby mode when the countdown timer is set.
When the time runs out, your device sounds an alarm, displays the timer note,
and flashes its lights.
• Press any key during the alarm to stop the timer.
• After 30 seconds the timer alert expires automatically.

Change the time

After you have set the timer, you can change the time.
1. In the standby mode, select
timer:.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select OK.
Stop the timer
After you have set the timer, you can stop the timer at any time.
In the standby mode, select
■ Stopwatch
Your device has a stopwatch that displays time in hours, minutes, seconds, and
fractions of a second in hh:mm:ss:s format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.

Measure time

1. In the standby mode, select
Lap timing > Start. The running time is displayed on the screen.
2. Select Split to note the lapsed time.
The timer continues to run. The split time appears below the running time. If
you split the time more than once, the new measured time appears at the
beginning of the list. Scroll to see previous measured times.
70
Menu > Organizer > Countdown timer
Menu > Organizer > Countdown timer
Menu > Organizer > Stopwatch
> Set
> Stop timer.
> Split timing or