Enabling Digital Audio Output - Samsung JS9000 Series E-Manual

Enabling digital audio output

(MENU/123) MENU
Since this Smart TV is Sony/Philips Digital Interface Format (S/PDIF)-enabled, you can make the TV
provide digital audio output to various digital audio devices, such as speakers, A/V receivers, and home
theatres, by adjusting the following settings.
●
DTV Audio Level
Allows you to adjust the volume when you are viewing digital broadcasts on the TV through an
A/V receiver.
"
This function is only available on digital channels.
"
The volume can be adjusted between 0 db and 10 db. However, this volume range may differ with the
broadcast signal.
"
For the MPEG / HE-AAC broadcast signal, the volume can be adjusted between 0 db and 10 db.
●
HDMI Audio Format
Sets the audio input signal format suitable for the external device connected to the TV's HDMI
port.
●
Audio Format
Selects the digital audio output (S/PDIF) format. The available formats are dependent on the
input source.
●
Audio Delay
Try Now
Helps correct timing mismatches between the audio and video tracks when you are watching TV
and listening to audio through a digital audio device. You can adjust the delay by up to 250 ms.
●
Dolby Digital Comp
Sets the Dolby Digital compression mode.
Sound Additional Settings
Try Now
Try Now
Try Now
Try Now