Samsung JS9000 Series E-Manual page 113

●
HDMI UHD Color
Allows you to set the
When set to On, the TV optimises processing of UHD 50P/60P signals.
To configure the
You can leave the HDMI cables still connected to the TV. Then, select this function, and then
follow the on-screen instructions.
"
After setting the HDMI connector to On, it takes some time to complete the conversion.
"
If the HDMI connector with
UHD content, the device may not operate properly. If this is the case, set
connector to Off.
"
Each HDMI connector can be individually optimised for
available only with a video source featuring the UHD 50P/60P 4:4:4 and 4:2:2 specifications.
"
The HDMI connector with
HDMI connector with
more information, refer to "Read Before Connecting a Computer (Supported Resolutions)".
●
Film Mode
Try Now
Optimises the picture quality for movies.
"
This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI
(1080i).
●
Auto Motion Plus
Removes blurring and judder from scenes with rapid movement. If you select Custom, you can
configure Blur Reduction
sharper LED image. To return to the default settings, select Reset.
"
When LED Clear Motion
"
If LED Clear Motion
Try Now
HDMI UHD Color
HDMI UHD Color mode for each HDMI connector, turn off the external devices.
HDMI UHD Color
HDMI UHD Color
HDMI UHD Color
Try Now
and Judder Reduction
is set to On, the screen appears darker than when it is Off.
is On at 60Hz video signal, the screen may flicker.
mode to On or Off for each HDMI connector on the TV.
enabled is connected to a device that does not support
HDMI UHD
set to Off supports up to UHD 50P/60P 4:2:0, while the
set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2. For
manually and set
HDMI UHD Color
Color. However, HDMI UHD Color
LED Clear Motion
for the HDMI
is
to On for a