Setting The Grid And Country Parameters; Setting The Installation Country - SMA SUNNY BOY 1600TL Installation Manual

Electrical Connection
5.6 Setting the Grid and Country Parameters
Changing grid-relevant and country parameters
To change grid-relevant parameters, you need a personal access code - the so-called
SMA Grid Guard Code. The application form for the personal access code is available in
the download area at www.SMA.de/en, in the "Certificate" category of the respective
inverter.
Ensure that you discuss the changes to these parameters with your network operator.
A detailed description of the operating parameters for the inverter is available in the download area
at www.SMA.de/en, in the "Technical Description" category of the respective inverter.
5.6.1 Setting the Installation Country
Using the "Default" parameter you can set the installation country and/or the grid connection
standard valid for the country via a communication device (e.g., Sunny WebBox) or a PC with
corresponding software (e.g., Sunny Data Control or Sunny Explorer). This, however, is only required
if the inverter was originally ordered for another country. You can see the default standard to which
the inverter was set on the type label and on the included supplementary document with the factory
settings.
36 SB16_21TL-IA-IEN112351
SMA Solar Technology AG
Installation Guide