Reports - Lexmark X646ef Menus And Messages Manual

Menu item Purpose
Assign Type/Bin Sends print jobs to a specific
output bin based on the
requested paper type.
Note: This menu item only
appears when Configure Bins
appears and is set to Mailbox
or Type Assignment.
If a user-defined name is
available, it appears instead of
Custom <x> Bin. If two or
more output bins share the
same name, the name only
appears once in the Assign
Type/Bin value list.
Overflow Bin Sends print jobs to a specific
output bin based on the
requested paper type.

Reports

Note: After a report prints, the MFP returns to the home screen.
Each report prints using some standard print values, such as:
• one copy
• portrait orientation
• 600 dots per inch (dpi) print resolution
• normal print area
• no separator sheets
• duplex printing is set off
• multiple page printing is set off
• toner darkness is set to eight
• media source is the user default
Using the MFP menus
Values and descriptions
Plain Paper Bin
Card Stock Bin
Transparency Bin
Labels Bin
Bond Bin
Envelope Bin
Letterhead Bin
Preprinted Bin
Colored Bin
Custom <x> Bin (<x>
represents 1–10)
Standard Bin*
Bin 1
Bin 2
Bin 3
Bin 4
Bin 5
Bin 6
Bin 7
Bin 8
Bin 9
Bin 10
Reports
29
Disabled*
Standard Bin
Bin 1
Bin 2
Bin 3
Bin 4
Bin 5
Bin 6
Bin 7
Bin 8
Bin 9
Bin 10
Note: Only installed output bins
appear. If Configure Bins is set to
Type Assignment, then the default
is the Standard Bin.
Note: Only installed output bins will
be displayed. If multiple output bins
are assigned the same name, the
name only appears once in the
Output Bin value list.