Ipsec Settings - D-Link DIR-640L User Manual

Section 3 - Configuration
The DIR-640L supports IPSec as the Server Endpoint. IPSec (Internet Protocol Security) protocols can provide IP security at the network layer.
IPSec: Check this box to enable IPSec.
Name: Enter a name for your VPN tunnel.
Local Subnet/ Enter the local (LAN) subnet and mask.
Netmask:
(ex. 192.168.0.0/24)
Remote IP:
Select if you will be connecting as a remote user or on a site
to site basis.
Remote Subnet/
Netmask:
Enter the remote subnet and mask.
Authentication:
Enter the pre-shared key for authentication.
Authentication If you choose to enable XAUTH you need to choose between
XAUTH: Server mode with an authentication database, or Client mode
with an user name and password.
Local ID:
Enter the local identification for how you appear on the
network VPN when connected locally.
Remote ID: Enter the local identification for how you appear on the
network VPN when connected remotely.
D-Link DIR-640L User Manual

IPSec Settings

48