Getting started
Installation options
Wall installation
1. Reverse the handset tab.
This tab holds the handset when you hang up. Hold down the switch hook,
and slide the handset tab up and out of its slot. Turn the tab so that the
end with the hook is up. Then, insert the handset tab back into its slot.
Switch hook
Handset tab
2. Reposition the mounting bracket for wall use.
Press on the mounting bracket, as shown in Figure A, to release the
bracket. Rotate the bracket, as shown in Figure B, so that the larger end is
toward the bottom of the telephone. Secure the bracket by positioning it,
as shown in Figure C, and pressing it (as indicated by the arrow) into the
telephone base until it locks in place.
Figure A
Figure B
7
Figure C