Brother P-touch E300 User Manual page 33

 Advanced
1
Enter text.
Example: Create a label "1A-A02", "1A-A03", "1A-A04",
"1A-B01", "1A-B02", "1A-B03", "1A-B04" from "1A-A01"
by using this function.
1 2
Press the Shift key and then press the Serialize key. Select " 進
階 " by using the
3
Select the first character(s) that you want to increase by using
the , , or
Example: Select 1 of A01.
1 4
Select 遞增 and 計算 by using the
by using the
Example: When you want to increase the number by one four
times, set 遞增 : 1, 計算 : 4.
1 5
Select the second number that you want to increase by using
the , , or
Example: Select A of A01.
You cannot select the first character(s) as it is greyed out.
6
Select 遞增 and 計算 by using the
by using the
Example: When you want to increase the number by one twice,
set 遞增 : 1, Count: 2.
7
Press the 執行 or 段落更換 key to display the screen that you set.
Example:
• When you press the Shift key and then press the Serialize
key, you can repeat the setting. After repeating the setting,
the message " 確認在這個動作後，覆蓋所有資料 ?" is
shown. If it's ok to overwrite, press 執行 key.
• You can select 全部 / 當前畫面 / 範圍 when printing as there
are multiple pages of labels.
• To print labels refer to "LABEL PRINTING" on page 41.
or key and press the 執行 key.
key and press the 執行 or 段落更換 key twice.
or key. Press 執行 or 段落更換 key.
key and press the 執行 or 段落更換 key twice.
or key.
or key and set the value
or key and set the value
Entering a Serialize Label
1
2
3
4
5
6
7
8
9
31