GE 25007 Instruction Manual page 7

Programming Your Remote, cont.
Programming Notes
• If your device does not respond to the remote after
trying all codes listed or your brand is not listed in
the code list, use the Auto Code Search method to
program your remote.
• Sometimes the first code that "works" with your
device may operate only a few functions of your
device. There may be another code in the code
list that performs more functions. Try other codes
from the code list for more functionality.
• With the Direct Code Entry method, you can
program any device button to control any device
in your home entertainment system.
For example, you can use the B-RAY or AUX device
button to control an audio receiver or a DVD, VCR,
satellite device, etc.
• For combination devices, you may have to enter a
code for each device. For example, for a DVD/VCR
device, you may have to enter a code for the DVD
under the DVD button and enter a code for the
VCR using a different device button on the remote.
• Write down the code found to operate your device
for future reference.
Note: If no buttons are pressed for
35 seconds, the remote will exit the
SETUP mode and you will have to
start over.
6. Point the remote at the device. Press
the POWER button—if the device
turns off, no further programming is
required for that device. If the device
does not turn off, return to step 3 and
use the next code found in the code
list. Continue this process until a code
for your device is found.
7. Repeat this process for each device
(for example TV, CBL, DVR, B-RAY,
SAT, AMP, AUX 1, AUX 2) in your home
entertainment system you wish
to control.
7