GE 25007 Instruction Manual page 10

Programming Your Remote, cont.
Favorite Function
Allows user to program up to 10 of their favorite
channels for quick access.
Setup Favorite Function
tv
setup
fav
1
3
2
4 6
5
7 9
8
0
1
3
2
4 6
5
7 9
8
0
fav
Using Favorite Function
• Press and release the FAV button. The red
indicator light will turn on. Press and release the
programmed button (0-9) The red indicator will
blink twice and the remote will send the code for
your pre-programmed channel.
1. Press and release the device button (tv,
cbl, dvr, etc). The indicator light will blink
once. Special Note: User must select
the device type that controls the
channels; for example if a user has a
Cable Box for controlling channels, then
this device button must be selected to
properly change the channels on the
cable box.
2. Press and hold the SETUP button for 2
seconds or until the red indicator light
turns on, then release the SETUP button.
3. Press and release the FAV button. The
red indicator will blink once and
remain on.
4. Press and release the numerical button
(0 – 9) that you will use for storing your
favorite channel. The red indicator will
blink once and remain on.
5. Enter the channel number you wish to
program, for example channel 4, 21,
4-1, 52-2.
6. Press and release the FAV button, the red
indicator will turn off. Your favorite
channel is now saved.
10