Troubleshooting; Some Hand Is Out Of The Correct Position - Citizen Eco-Drive b740 Instruction Manual

9. TROUBLESHOOTING

If the solar powered watch is insufficiently charged or power of the watch is
considerably consumed, the watch functions are limited to a certain range and
the watch warns the user of its status by various means such as abnormal
indications. To avoid such a power failure, always try to charge the watch
sufficiently.
●

Some hand is out of the correct position.

If a strong shock or static electricity is given to the watch by careless handling,
the hands may show an incorrect indication.
• Adjust the function hand (chronograph second indicator) when it is out of the "0"
position (the mode hand functions normally) in the following conditions referring
to "10. SETTING FUNCTION HAND AT "0" POSITION".
1) When the watch is set to the time adjustment mode (the crown is pulled to the
second click stop position)
2) When the watch is in the dive mode (standby status).
3) When the watch is in the reset status of the chronograph mode
• In the case the function hand and/or the mode hand are out of their respective
"0" positions in other modes, adjust the hand(s) referring to "11. ALL RESET/
ADJUSTING HAND POSITION".
41