a: Charge levels (LV1, LV2,NG) ...... Charge level of the watch is indicated as
b: Overzone mark ........................... When the diving depth exceeds 50 meters
c: Depth meter scale....................... The diving depth is indicated by the
d: Pressure sensor.......................... Measures the depth by sensing the water
e: Water sensor .............................. When the water sensor gets wet, the
f:
Rotating bezel ............................. The diver can know the elapsed time of
g: Solar cell ..................................... Electric energy necessary for running the
follows (LV.1, LV.2, NG) by the function
hand. These guidelines indicate whether
the depth meter function is usable or not.
(125 feet) or there is something abnormal
in the depth meter function, the function
hand points to the overzone mark.
function hand on this depth meter scale.
pressure.
watch is automatically shifted to the dive
mode.
diving by using this rotating bezel.
watch is generated by this solar cell when
it is exposed to enough light for charging.
15