Chevrolet Beat diesel Owner's Manual page 84

80 Climate Control
Fan speed
Adjust the air flow by switching the fan
to the desired speed.
Demisting windshield
1. Set the recirculation mode to
outside air mode and turn the air
distribution knob to DEFROST
2. Switch on cooling .
3. Select desired temperature.
4. Adjust the fan control knob to
desired speed.
5. Turn the temperature control knob
to the red area for warm air.
A temperature difference between the
outside air and the windshield can
make the windshield mist up and
reduce your forward vision.
Do not use the floor/defrosting mode
( ) or the defrosting (
extremely humid weather when the
temperature control is set to blue area.
1 2 3
Otherwise accidents can result,
0
4
leading to vehicle damage and
personal injury.
Air Recirculation System
.
The air recirculation mode is operated
with the
Selects either outside air or recirculated
inside air.
Caution
) mode in
lever.
Warning
Driving with recirculation mode for
prolonged period of time can make
you sleepy. Periodically turn to the
outside air mode for fresh air.
The exchange of fresh air is reduced
in air recirculation mode. In
operation without cooling the air
humidity increases, so the windows
may mist up. The quality of the
passenger compartment air deterio-
rates, which may cause the vehicle
occupants to feel drowsy.
Heating
Normal heating
1. Turn temperature control knob to red
area for heating.
2. Turn air distribution knob to face or
bi-level mode.
3. Turn fan control knob to desired
speed.