Chevrolet Beat diesel Owner's Manual page 114

110 Vehicle Care
4. Remove bulb from reflector
housing.
5. When fitting a new bulb, engage the
lugs in the recesses on the reflector.
6. Engage the spring clip.
7. Place headlamp protective cover in
position and close.
8. Plug connector onto bulb.
Headlamp aiming
The screw located above the headlamp
is to adjust low-beam headlamp aiming.
Caution
If the headlamps need to be re-aimed, it
is recommended that the vehicle is
taken to your CHEVROLET retailer
for service because it is related with
safety.
Parking lamps
1. Detach plug connector from bulb.
2. Remove protective cover.
3. Remove parking lamp bulb holder
from reflector.