Quick Guide For Phoenix Service Sw Installation; Phoenix Installation Steps In Brief - Nokia NSB-9 Service Manual

CCS Technical Documentation

Quick Guide for Phoenix Service SW Installation

Phoenix Installation Steps in Brief

DCT-4 generation Test and Service Software is called "Phoenix"
These are the basic steps to install the Phoenix
• Install the Phoenix Service SW
• Install the Data Package for Phoenix (product specific data and flash update package)
• Manage connection settings (depends on the tools you are using)
• Update FPS-8 SW (if you use FPS-8)
• Activate FPS-8
• Update JBV-1 Docking Station SW (only when needed)
The flash update files are delivered with then Phoenix Data Package so unless you want
to use certain version of this package, separate installation package is not needed any-
more. If you want to use it, it should be installed after connection management, before
FPS-8 update.
Please refer to Service Manual and Technical Bulletins for more information con-
cerning phone model specific service tools and equipment setup.
Issue 1 04/03
Company confidential
Copyright Nokia. All rights reserved.
NSB-9
Page 5