Nokia NSB-9 Service Manual page 121

CCS Technical Documentation
Set Loss
This is the component for saving RF-losses (of cables and jigs) to file. These loss values
are needed when you tune the phone with Phoenix (using Auto-Tune component). When
you measure the losses you have to be very careful, because these values affect directly
how well the phone is tuned.
Note! Components are protected by PKD-1CS, PKD-1NS, PKD-1 and PKD-1P dongles using standard
TSS protection procedure. Autotuning itself is possible with all these dongles but with PKD-1P and
PKD-1 dongles user is not able to set the loss.
Issue 1 04/03
Figure 5: Set Loss menu
Figure 6: Loss values
Copyright Nokia. All rights reserved..
NSB-9
Page 43