User's Guide Zephyr TS
Basics
4.2
Switching the Power ON / OFF
This section describes how to power ON and OFF the Zephyr TS. When switching ON the
printer, the computer automatically starts the software. From the monitor, the operator has
access to the printer's User Interface (UI).
4.2.1
Switching the power ON
Be sure to read and understand the safety warnings before handling the printer.
See also
Safety instructions on page 11
Starting up from a windows based environment on page 44
Emergency Shutdown on page 48
Cleaning the heads on page 224
Cleaning the receiver box on page 232
Checking the temperature and pressure settings on page 99
Heater settings on page 203
Adjusting the throttle on page 242
Performing a nozzle check on page 101
Important
If a situation requires an immediate shutdown of all activities, push the
emergency stop.
Refer to
Note
Before powering ON, make sure that loose objects such as clothing, tools and
cleaning materials are not interfering with the printer mechanisms.
40
Emergency Shutdown on page 48
AP-75390 - Revision 1.0