Metrologic MetroSelect Configuration Manual page 79

S E
ECTION
* Use Configurable Code
ID Bytes as Prefixes
³ 1 0 5 5 0
User configured, code
specific ID bytes are
transmitted before the data.
If using prefixes, user
configured suffixes
can not be used.
~ Configurable UPC-A ID
³ 9 0 5 6 0
† While using the Multi-Code method, scan this bar code followed by the 3 code byte bar
codes in Section M of Book 2 that represent a unique ID character to be associated with this
bar code type. (Refer to the Multi-Code Method on page x.)
C
ONFIGURABLE
7
†
0
Prefixes/Suffixes
ID C
HARACTERS
Use Configurable Code ID
Bytes as Suffixes
User configured, code
specific ID bytes are
transmitted after the data.
I
DENTIFIERS
~ Configurable UPC-E ID
, C S
ODE PECIFIC
³ 1 0 5 5 1 7
If using suffixes, user
configured prefixes
can not be used.
C
HARACTER
³ 9 0 5 7 0 0
E 3
†