Step 7 : Turn The Power On - imagistics fx2080 Installation Manual

Step 7 : Turn the power on

1
Turn the power on.
The markings are international standards: [ | ] means on, [ ] means off.
2
Perform Step 8 "Turn off the transport mode" first (see next page). Once
the transport mode has been turned off, you may procedure to the next
procedure.
3
In some cases the following message will appear. If this message appears,
please enter the current date and time, then press [Enter].
4
The "Server Initializing" message will appear on the display.
Please wait a few minutes until it disappears.
Installation Manual