Table of Contents
Advertisement
3
Plug the LAN cable into the LAN connector.
4
Plug the other end of the LAN cable into a 10Base-T/100Base-Tx Ethernet
hub, or into the appropriate RJ-45 wall jack.
Connect the power cord
1
Plug the non-pronged end of the supplied AC power cord into the AC
socket on the machine.
2
Plug the pronged end into a properly grounded AC outlet.
NOTE : The appearance of the plug and outlet differs according to the countries.
0
Installation Manual
PH ON
E1
PH ON
E2
LI N E
Ethernet hub
PH ON
E1
PH ON
E2
LI NE
Advertisement
Table of Contents
