Dodge Charger 2012 User Manual page 57

Making A Phone Call
• Press the Uconnect™ Phone button
• (After the BEEP), say "dial" then the number (or "call" then the name as listed in
your phone; see Phonebook below).
NOTE: You can also initiate a call by using the touch-screen on the Phone main screen.
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect™, press the Phone button
.
• To end a call, press the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, touch the mute soft-key on the Phone main screen to mute and
unmute the call.
Transfer Ongoing Call Between Handset And Vehicle
• During a call, touch the Transfer soft-key on the Phone main screen to transfer an
on going call between handset and vehicle.
Common Phone Commands
Common Phone Commands (Examples)
"Call John Smith"
"Call John Smith mobile"
"Dial 1 248 555 1212"
"Call Emergency"
"Call Towing Assistance"
"Redial"
Phonebook
• Uconnect Touch™ radios will automatically download your phonebook from your
paired phone, if this feature is supported by your phone. Entries are updated each
time that the phone is paired. If your phone book entries do not appear, check the
settings on your phone. Some phones require you to enable this feature manually.
• Your phone book can be browsed on your radio screen, but editing can only be
done on your phone. To browse, touch the Phone soft-key, then the Phonebook
soft-key.
• Favorite phonebook entries can be saved as Favorites for quicker access. Favorites
are shown at the top of your main phone screen (8.4 & 8.4N Only).
Voice Recognition Tips
• Use longer names that are less easily mistaken for others. For examples, say "Call
John Doe" instead of "Call John".
• You can "chain" commands together for faster results. Say "Call John Doe,
mobile", for example.
ELECTRONICS
.
.
55