Connecting The Hardware; Understanding The Setup Utility Software - Lexmark N4000e User Manual

Connecting the hardware

Follow all of the steps on the Setup Sheet that came with your print server.
Understanding the print server indicator lights
Power ( ): This light indicates that the print server power supply is properly connected.
USB ( ): This light indicates the printer and print server are properly connected by the USB
cable and the printer is on.
Status (!): This light indicates a firmware error has been detected. If the light is on, see
"Understanding the print server indicator lights."

Understanding the Setup Utility software

If your print server/printer is shown in the list...
Your print server and attached printer may appear on the screen in a combination of the following
states:
• Print server configured
• Print server unconfigured
• Printer associated with a port
• Printer not associated with a port
See the following table to determine the state of your print server and printer and what to do in each
case.
Power
Status
USB
Connecting the hardware
8
Setup Sheet