Page 1
MarkNet external print servers MarkNet X2000 series and MarkNet Pro Quick Start Jan 2000 www.lexmark.com...
Page 2
International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727.
Setup Connect the hardware MarkNet external print servers are sometimes called external network adapters or ENAs. Turn off and unplug the printers. Connect only one network Connect all the cables and hook up the power supply between the cable even if the MarkNet has printer and the MarkNet external print server.
About the Drivers, MarkVision and Utilities CD You may have more than one version of this CD, received at different times with different Lexmark products. Always use the latest version CD. TCP/IP Step 1: Set the IP address, netmask and gateway...
• If you don’t have DHCP, there are other methods you can use to manually assign the address, such as the printer operator panel, static ARP and telnet, RARP and telnet, BOOTP, or MarkVision or other Lexmark utility. Instructions for three of these methods follow.
Set up a print queue on the server. Do this by creating a printer object. Click Start, Settings, Printers, Add Printer. When prompted, select My Computer (not Network printer server). Click Add Port. Select Lexmark Network Port, and then click New Port. Follow the instructions on the screen. Share the queue.
Page 8
Point-to-point printing (LexIP) You can print from any Windows 95, Windows 98 or Windows NT workstation directly to a Lexmark printer located anywhere on the IP network. No server is required. Install the TCP/IP software component on the workstation. Look on the These are the Windows 95/98 instructions.
Some versions of the Drivers, MarkVision and Utilities CD that you install the Lexmark NDPS IP Gateway. This allows your printers to be contain the Lexmark NDPS IP tightly integrated with NDPS so that you can easily monitor, control and print Gateway.
PPD from the Drivers, MarkVision and Utilities the PPD lists which options CD. To do this, launch the CD, click Lexmark Installer, select the are valid for the printer. appropriate PPD for your printer, and then click Install. Go back to the Chooser and try to create the new printer again.
(for field of your browser (for example, TCP/IP). example, http: //192.168.236.24). Try printing again. If you are still having trouble, contact Lexmark for help. See “Lexmark customer support” on page 15.
README file or a technical white paper either on the Drivers, MarkVision and Utilities CD or in the package you downloaded from Lexmark’s web site. If you are still having trouble, contact Lexmark for help. See “Lexmark customer support” on page 15. Non-NDPS (queue-based) Make sure the NetWare protocol is turned on (activated) in the print server.
Uninstall, and then reinstall MarkVision. During the reinstallation, select only the network protocols you actually use (for example, TCP/IP). This also helps MarkVision run faster. Try printing again. If you are still having trouble, contact Lexmark for help. See “Lexmark customer support” on page 15.
Optimize Lexmark Printer Output. workstation is on LocalTalk, you cannot see a printer on If you are still having trouble, contact Lexmark for help. See “Lexmark Ethernet unless there is a customer support” on page 15.
Lexmark customer support World Wide Web www.lexmark.com CompuServe Go Lexmark Internet ftp.lexmark.com U.S. and Canada, 1-800-LEXMARK technical support and any other customer needs Lexmark phone numbers On the Drivers, MarkVision and Utilities CD, (worldwide) click Contact Lexmark, Customer Support.
To assure compliance with FCC produit risque de provoquer des interférences regulations on electromagnetic interference for a radio, auquel cas l'utilisateur devra prendre les Class A computing device, use a properly mesures adéquates. shielded and grounded cable such as Lexmark...
Lexmark components. The safety features of some parts oportunas. may not always be obvious. Lexmark is not responsible for the use of other replacement parts. AVISO: Este produto pertence à classe A. Em um ambiente doméstico, ele pode causar...
Page 18
• Dieses Produkt und die zugehörigen Komponenten darder for sikkerhed. Delenes sikkerhedsfunktioner kan wurden entworfen und getestet, um beim Einsatz die være skjulte. Lexmark påtager sig intet ansvar for bru- weltweit gültigen Sicherheitsanforderungen zu erfüllen. gen af uoriginale reservedele. Die sicherheitsrelevanten Funktionen der Bauteile und Optionen sind nicht immer offensichtlich.
Page 19
Lexmark. Os recursos de segurança de alguns componentes podem não ser sem- descrites a les instruccions de funcionament, confieu-la a pre óbvios. A Lexmark não é responsável pelo uso de un professional. outros componentes de substituição. • Aquest producte està dissenyat, comprovat i aprovat per tal d'acomplir les estrictes normes de seguretat globals amb la utililització...