Lexmark series x5100 User Manual page 9

Press:
Black Copy
Color Copy
Copy Quality
E-mail, File,
Software
Left arrow
Right arrow
Number of Copies
Options
Photo Copy
Photo Options
Power
Reduce/Enlarge
Select
Start Fax
Start Scan
Stop/Clear
When you want to:
Make a black and white copy using the current copy
settings. For help, see page 20.
Make a color copy of a color image using the current
copy settings. For help, see page 20.
Select a copy quality: Quick, Normal, Better, or Best.
Select a new scan destination. For help, see page 22.
Note: Use this button when the All-In-One is attached to
a computer.
Decrease a menu number or scroll backward through a
list of options on the display.
Increase a menu number or scroll forward through a list
of options on the display.
Specify the number (1-99) of copies to make.
Scroll through the menu headings. For help, see page 6.
Begin a photo copy job using current Photo Options
settings (the highest quality scan and print resolutions).
Select the quantity and size of photograph reprints.
Turn your All-In-One on or off.
Note: If your All-In-One is on, you can turn it off, and then
enter the state of lowest power. To do this, hold the Power
button for at least 5 seconds.
Reduce or enlarge your original document by
percentage, to Fit to Page, or to poster size.
Choose the option currently shown on the display.
Scan and send a document to the fax software.
Note: The All-In-One must be attached to a computer
with a modem.
Scan an image using the current scan settings, and then
send it to a program.
Note: The All-In-One must be attached to a computer.
• Cancel a scan, print, or copy job in progress.
• Exit a menu and return to the default settings.
5