Yamaha CRYPTON T110C Owner's Manual page 62

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Wheel axle
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the pro-
6
jection on the wheel hub fits in ei-
ther slot of the speedometer gear
unit.
1
1
1. Projection
2. Speedometer gear unit
3. Slot
EAU47730
2. Lift the wheel up between the fork
legs.
TIP
Make sure that there is enough space
between the brake pads before insert-
ing the brake disc and that the retainer
in the speedometer gear unit fits over
the slot on the fork leg.
6-32
2
3
1. Retainer
2. Slot
3. Insert the wheel axle, and then in-
stall the washer and the axle nut.
4. Take the motorcycle off the center-
stand so that the front wheel is on
the ground.
5. Tighten the axle nut to the speci-
fied torque.
Tightening torque:
Axle nut:
39 Nm (3.9 m·kgf, 28 ft·lbf)
TIP
When tightening the axle nut, hold the
wheel axle with a wrench to keep it from
turning.