Shift Pedal; Brake Lever - Yamaha CRYPTON T110C Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
3
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Start switch " "
Push this switch to crank the engine
with the starter. See page 5-1 for start-
ing instructions prior to starting the en-
gine.
EAU12400
/ "

Shift pedal

" for the high
1
2
EAU12460
/ "
N
1
2
". When re-
3
4
1. Shift pedal
2. Neutral position
The shift pedal is located on the left
EAU12500
side of the engine. This motorcycle is
equipped with a constant-mesh 4
speed transmission.
EAU12711
TIP
Use your toes to shift up and your heel
to shift down.
EAU37460

Brake lever

4
3
2
1
N
2
1. Brake lever
The brake lever is located at the right
handlebar grip. To apply the front
brake, pull the lever toward the handle-
bar grip.
3-4
EAU12890
1