Lexmark 2300 Series User Manual page 30

Load
Up to 20 transparencies
Up to 100 sheets of
coated or premium paper
Make sure
• The rough sides of the transparencies are facing
you.
• The paper guide rests against the edge of the
transparencies.
Note: Since transparencies require more drying
time, we recommend that you remove each
transparency as it exits, and allow it to dry to avoid
ink smudging.
• If the paper came with instructions, you read them
carefully.
• You load the paper vertically against the right side
of the paper support.
• If there is a watermark on the paper, you place
the mark facing away from you.
• You do not force the paper into the All-In-One.
• You squeeze and slide the paper guide to the left
side of the paper.
30