Light Control Switch; Headlights - Subaru 2014 Impreza WRX Owner's Manual

when the battery voltage is discon-
nected and then reconnected for bat-
tery replacement or fuse replacement.

Light control switch

The light control switch operates when the
key is inserted into the ignition switch.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the key is removed from
the ignition switch.
NOTE
Even if the key is removed from the
ignition switch, the lights can be illu-
minated by operating the light control
switch from OFF to the
position. In this case, if the driver s
door is opened, a chirp sound will
inform the driver that the lights are
illuminated.
CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch
is turned to the OFF position. If
the vehicle is left unattended for
a long time with the light control
switch set to a position other
than OFF , the battery may be
Instruments and controls/Light control switch
discharged.

Headlights

or
To turn on the headlights, turn the knob on
the end of the turn signal lever.
position
Instrument panel illumination, headlights,
front side marker lights, rear side marker
lights, tail lights and license plate lights are
on.
position
Instrument panel illumination, front side
marker lights, rear side marker lights, tail
lights and license plate lights are on.
3-29
CONTINUED