The Configuration Icon - Lexicon Reverb/Effects Processor PCM96 Owner's Manual

10
Note that pressing the Back button or the Select knob have different results
depending on what kind of preset is loaded. The following diagram shows
what happens when you press the Select knob, Back button, and Machine
button in both System View and Machine View.
System Category
Selection View
Press Press
Select Back
System View
(System Presets)
Press Press
Select Back
System Menu

the coNFIGURAtIoN IcoN

The Configuration icon appears at the upper right corner of the Display. It
tells you if a System Preset or a Machine Preset is loaded.
When a System Preset is loaded, a border appears around the Configuration
icon and the words System View appear in the Display, below the preset's
name.
1:ConcertHall->Flange 1:ConcertHall->Flange
System View
-Press Machine Btn To View Engines
(System View)
When a Machine Preset is loaded, the selected machine is highlighted in the
Configuration icon, and three of the loaded preset's parameters appear at the
bottom of the Display.
Machine Category
Selection View
Press
Select
Press Machine
Button
Machines 1-4
(Machine Presets)
Press
Select
Machine Menu
Configuration Icon
Press
Back
Press Machine
Button
Press
Back
48 48
(System Preset)