Download Print this page

ENFORCER VS-1AHHAQ User Manual page 3

Hdmi surge protector

Advertisement

Installation:
NOTE: These instructions assume that 2 HDMI devices have already been connected together.
Protecting a Single Device:
1. Detach the existing HDMI cable
―Unprotected‖ end of the HDMI Surge Protector.
2. Attach another HDMI cable (not included) between the device to be protected and the
―Protected‖ end of the HDMI Surge Protector. The protected cables should be as short as
possible and should not cross unprotected cables.
3. Connect the ground wire from the HDMI Surge Protector (either end
system should use a single ground point and the protected device should be isolated from
ground.
HDMI Monitor
(Protected)
Protecting Multiple Devices:
1. Detach the HDMI cable
2. Attach an HDMI Surge Protector to each end of the HDMI cable, ensuring that the cable is
connected to the ―Unprotected‖ end of the HDMI Surge Protector.
3. Attach another HDMI cable (not included) between each device to be protected and the
―Protected‖ end of its respective HDMI Surge Protector. For best protection, the protected
cables should be as short as possible and should not cross unprotected cables.
4. Connect the ground wire from each HDMI Surge Protector (either end
system should use a single ground point and the protected device should be isolated from
ground.
HDMI Monitor
(Protected)
Note: The maximum length of the HDMI cable will depend on the cable's specification and quality.
1
Note: There is a ‗Grounding Wire Location' included on both ends of the HDMI Surge Protector.
2
Grounding wire can be attached to either of these locations.
SECO-LARM U.S.A., Inc.
from the device to be protected and attach that cable to the
1
Short
HDMI
HDMI Surge
cable
Protector
Protected
End
To ground
from both devices to be protected.
1
Short
HDMI
HDMI Surge
cable
Protector
Protected
End
To ground
2
(Ground can be attached to either end of surge protectors)
ENFORCER HDMI Surge Protector
HDMI cable
1
Unprotected
End
(can be attached to either end of surge protector)
2
HDMI cable
1
Unprotected End
) to earth ground. The
2
HDMI Player
(Not Protected)
) to earth ground. The
2
Short
HDMI
HDMI Surge
cable
Protector
Protected
HDMI Player
End
To ground
2
(Protected)
3

Advertisement

loading