ENFORCER HDMI Surge Protector Introduction: The ENFORCER HDMI Surge Protector is a passive device that helps protect sensitive HDMI equipment from power surges. The device can be deployed in new installations or existing ones. The ENFORCER HDMI Surge Protector should be installed between HDMI equipment such as players, monitors, and projectors to protect against surges that could damage the video equipment.
Page 3
ENFORCER HDMI Surge Protector Installation: NOTE: These instructions assume that 2 HDMI devices have already been connected together. Protecting a Single Device: 1. Detach the existing HDMI cable from the device to be protected and attach that cable to the ―Unprotected‖...
ENFORCER HDMI Surge Protector Troubleshooting: Reduce the cable length—max. 16.4ft (5m) for 1080p, 11.5ft Video image is weak or faded (3.5m) for 4K2K Replace with a higher-grade HDMI cable Double-check that the cables were connected properly Run a continuity test on all wires in the cable ...