Radio; Radio Menu; Band Selecting; Manual Tuning (Step By Step) - Pioneer DVH-875AVBT Operation Manual

Operating this unit

Radio

Radio menu

RADIO
POWERFUL
Source indicator
Time
Band
Preset station No.
Sound effect indicator
Frequency

Band selecting

Press [BAND ] button repeatedly to
select desired band. The band indicator
(FM1, FM2, FM3 or AM) will be displayed.

Manual tuning (step by step)

Press the [ • • ] (Left) or [ • • ] (Right) button
to tune step by step.

Seeking

1 Press and hold the [ • • ] (Left) or [ • • ]
(Right) button more than 2 seconds to
seek previous/next available station.
2 You can cancel seek tuning by press
[M.C.] or [ • • ] (Left) / [ • • ] (Right) button.

Storing and recalling stations

You can easily store up to six stations for
each band as presets.
Storing a preset station manually
1 Tune to a desired station as above
method.
2 Press and hold [M.C.] button until the
preset station flashes on the screen,
press [ ] (Up) or [
select a preset number, then press [M.C.]
button to store it.
You may also do the operation by the
remote control as following step:
Press and hold a number button (1-6) on
the remote control, the current station will
be stored in the memory.
Storing a preset station automatically
BSM (best stations memory) automatically
stores the 6 strongest stations of each
band, the unit can store 18 stations in total.
Best stations memory
1 Press and hold [
than 2 seconds to search and store
stations. During searching and storing,
"BSM" appears on the display.
2 The unit will scan play the preset stations
automatically and "AMS-" appears on the
display.
• To cancel, press [
again.
Recalling preset stations
Press [ BSM] button to scan play all the
preset stations.
LOC/DX (local / distant seek
tuning)
Local seek tuning lets you tune to only
those radio stations with sufficiently strong
signals for good reception.
Distant seek tuning allows to receive all the
signals.
1 Press and hold the [SEL] button to
display the setting mode.
2 Press [ • • ] (Left) / [ • • ] (Right) button on
the front panel or [
the remote control to select Radio setting
menu.
3 Rotate the [M.C.] or press [
button on the front panel or [
on the remote control to move the cursor
to LOC DX option.
4 Press [M.C.] or [ENTER] button to spread
the sub-menu.
5 Rotate the [M.C.] or press [ ] (Up) / [ ]
(Down) button on the front panel or [
[ ] button on the remote control to
select desired option.
6 Press [M.C.] or [ENTER] button to confirm.
Section
] (Down) button to
BSM] button more
BSM] button
] / [ ] button on
] (Down)
] button
] /
En
03
11