Wolf IM15 Installation Manual page 13

Multi-Function Cooktop Installation
Cooktop Removal
The multi-function cooktop must be disconnected from
the electrical and gas supply prior to removal.
IMPORTANT NOTE: Removal of the multi-function cooktop
should only be performed by a Wolf authorized service
center technician.
If removing the multi-function cooktop is necessary for
cleaning or service, shut off the gas supply. Disconnect
the electrical and gas supply. Remove the mounting
brackets on each side of cooktop and remove. Reinstall in
the reverse order and check gas connections for leaks.
Troubleshooting
IMPORTANT NOTE: If the multi-function cooktop does not
operate properly, follow these troubleshooting steps:
• Verify that electrical power is being supplied to the
cooktop.
• Check the gas supply and electrical connections to
ensure that the installation has been completed
correctly.
• Check that the gas supply shut-off valve is in the open
position.
• Check polarity of the electrical outlet if excessive
igniter clicking occurs immediately after installation.
• Follow troubleshooting procedures outlined in the
Wolf gas multi-function cooktop use & care guide.
• If the multi-function cooktop still does not operate
properly, contact a Wolf authorized service center. Do
not attempt to repair the cooktop yourself. Wolf is not
responsible for service required to correct a faulty
installation.
13
wolfappliance.com/specs