Wds Mode - D-Link DAP-2690 User Manual

Section 3 - Configuration
In WDS mode, the DAP-2690 wirelessly connects multiple networks, without functioning as a wireless AP. After completing the desired settings,
click the Save button to let your changes take effect.
Wireless Band: Select either 2.4 GHz or 5 GHz from the drop-down menu.
WDS is selected from the drop-down menu.
Mode:
Service Set Identifier (SSID) is the name designated for a
Network Name
(SSID): specific wireless local area network (WLAN). The SSID's
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this feature
SSID Visibility:
broadcasts the SSID across the network, thus making it
visible to all network users.
Enabling this feature automatically selects the channel that
Auto Channel
Selection: will provide the best wireless performance. This feature is
not supported in WDS mode.
All devices on the network must share the same channel.
Channel:
To change the channel, use the drop-down menu to make
the desired selection.
Allows selection of the channel width you would like to
Channel Width:
operate in. 20 MHz and Auto 20/40 MHz allow both
802.11n and non-802.11n wireless devices on your network
when the wireless mode is Mixed 802.11 b/g/n in 2.4G and
Mixed 802.11 a/n in 5G. 802.11n wireless devices are allowed
to transmit data using 40 MHz when the channel width is
Auto 20/40 MHz.
D-Link DAP-2690 User Manual

WDS Mode

19