Manual Sensor Cleaning - Canon EOS 700D Instruction Manual

3
Manual Sensor CleaningN
Dust that could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc. Before cleaning the sensor,
detach the lens from the camera.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
If you use a battery, make sure it is fully charged. If the battery grip with size-
AA/LR6 batteries is attached, manual sensor cleaning will not be possible.
For the power source, using AC Adapter Kit ACK-E8 (sold separately) is
recommended.
226
1
Select [Sensor cleaning].
Under the [53] tab, select [Sensor
cleaning], then press <0>.
2
Select [Clean manually]. Select [Clean manually]. Select [Clean manually].
Select [Clean manually], then press Select [ Select [Clean manually
0 0
<0>. >. >.
3
Select [OK]. Select [OK]. Select [OK].
Select [ Select [OK], then press <0>. Select [
In a moment, the reflex mirror will
lockup and the shutter will open.
4
Clean the sensor.
5
End the cleaning.
Set the power switch to <2>.
Clean manually