Mechanical Design; Key - Siemens RDH10RF User Manual

Mechanical design

Key

Siemens
Building Technologies
The controller consists of 4 parts:
•
Plastic housing with digital display accommodating the electronics, operating ele-
ments and built-in room temperature sensor
•
Baseplate (mounting base)
•
Removable battery compartment
•
Fold-out stand
The housing engages in the baseplate and snaps on. The baseplate carries the screw
terminals. There is a reset button on the rear of the unit.
1 Display of the room temperature in °C
2 Indicates a request for heat
3 Temperature setting knob
4 Battery compartment
5 Comfort temperature setpoint
6
RF
Indicates RF signal test
TEST
7 Indicates low battery power; replace batteries
Room temperature controllers
3/10
CE1N3070en
20.11.2007