I DISASSEMBLY PROCEDURE
(Remove parts in the order as numbered.)
Disconnect the power cord from the AC outlet.
1. Removal of Top Cover
a. Remove 4 screws (1) and 4 screws (2). (Fig. 1)
b. Slide the Top Cover rearward to remove it. (Fig. 1)
2. Removal of Front Panel
a. Remove the BASS and TREBLE knobs (3). (Fig. 1)
b. Remove 6 screws (4) and then remove the Front
Panel. (Fig. 1)
3. Removal of Sub Chassis
a. Remove 2 push rivets (5) and then remove the Side
Plates. (Fig. 1)
b. Remove 2 screws (6) and then remove the Sub
Chassis. (Fig. 2)
c. Remove CB307, 441~443. (Fig. 2)
d. Loosen the harness fixture fixing the cable.
1
Side Plate
5
4
4
3
2
Fig. 1
RX-V730/RX-V730RDS/RX-V630/RX-V630RDS
HTR-5560/HTR-5560RDS/DSP-AX630/DSP-AX630SE
1
2
3
4
5
6
2
1
Side Plate
5
CB441
CB442
6
6
CB307
CB443
Fig. 2
15