Miele KM 6350 Operating And Installation Instructions page 52

Problem solving guide
Problem
The sensor switches
show increased
sensitivity or fail to
react.
FE flashes alternately
with a number in the
timer display.
FE 44
FE 47
FE 48
Other fault messages
FE..
52
Possible cause
The sensitivity level of the
sensor switches has
changed.
The overheating protection
mechanism has been
activated.
The fan is blocked or
faulty.
There has been a fault in
the electronics.
Remedy
Make sure that there is no
direct light (from the sun or
from an artificial source)
falling onto the cooktop. The
area surrounding the cooktop
must not be too dark.
Make sure the cooktop or the
sensor switches aren't
covered. Take any pans off
the cooktop and wipe away
any food deposits.
Interrupt the power supply to
the cooktop for approx. 1
minute. If this does not solve
the problem, please call
Miele.
See "Overheating protection".
Check whether the fan is
blocked by an object, e.g. a
fork, and remove the
obstruction. If the fault
message does not disappear,
call Miele.
Interrupt the power supply to
the cooktop for approx. 1
minute. If the problem
persists after reconnecting
the appliance to the power
supply, please contact Miele.