Miele KM 6350 Operating And Installation Instructions page 51

Problem
Power setting 9 is
automatically reduced
if the combined
cooking and casserole
zones are set to power
setting 9.
The appliance switches
off during operation
and F flashes in the
timer display.
The food in the pan
hardly heats up or does
not heat up at all when
the Auto heat-up
function is switched
on.
The fan continues to
run after the cooktop
has been switched off.
Possible cause
If both zones are
operated on power
setting 9, the overall
power outlet might be
exceeded.
One or several of the
sensors are covered,
for example, by finger
contact, food boiling
over or by an object
such as an oven glove
or tea towel.
There is too much food
in the pan.
The pan is not
conducting heat
properly.
The fan will continue
running until the
appliance has cooled
down. It will then
switch itself off
automatically.
Problem solving guide
Remedy
Clean the control area or
remove the obstruction (see
"Safety switch-off").
Start cooking at the highest
setting, then turn the heat
down manually.
51