Lubrication - Epson Stylus Photo RX 560 Service Manual

EPSON Stylus PHOTO RX560/580/590

6.1.3 Lubrication

The types and amount of grease to be applied have been determined based on the
evaluation at factory. Accordingly, definitely use a suitable volume of designated
grease to the designated points for repair and maintenance of the product. Designated
types of grease and application points are as shown below.
C A U T I O N
Never use any grease other than those specified, since such
grease can affect adversely the mechanical life and functions of
this product or result in damage to this equipment.
As the suitable volume is also designated based on evaluation
result, avoid applying any undesignated volume.
Do not lubricate any part other than those specified. Take care
that no grease adheres to any paper transport parts, such as
rollers, or the Printhead; otherwise, the print quality may drop.
Specified lubricant, etc.
Table 6-3. Specified Lubricant, etc.
Type Name
G-71
Grease G-74
G-45
Insulating Tape Acetate Tape
Maintenance
Parts Code Available
1304682
1409257
EPSON
1033657
1003963
LUBRICATION OF PAPER GUIDE FRONT ASSY
PF Roller Shaft and the
Lubrication
shaft holders (2
Points
positions: right and left)
Type G-71
Amount of
ø 1x3 mm
Application
Applying
Injector
Tool
Make sure that the
coated surface of the PF
Precautions
Roller Shaft is free
from grease.
Paper Eject Roller
Lubrication Shaft and shaft holders
Points (2 positions: right and
left)
Type G-71
Amount of
ø 1x3 mm
Application
Applying
Injector
Tool
Make sure that the
rubber rollers on the
Precautions Paper Eject Roller
Shaft are free from
grease.
Overview
Left side of PF Right side of PF
Roller Shaft Roller Shaft
Coated surface must
be free from grease
G-71
G-71
Left side of Paper Right side of Paper
Eject Roller Shaft Eject Roller Shaft
Rubber rollers
must be free
from grease
G-71
Revision A
G-71
89