Disassembly And Reassembly Procedure - Epson Stylus Photo RX 560 Service Manual

EPSON Stylus PHOTO RX560/580/590

4.1.4 Disassembly and Reassembly Procedure

The flowchart below shows step-by-step disassembly procedure for Stylus PHOTO RX560/580/590. When disassembling each component, refer to the page indicated for the
relevant component.
Disassembly of Panel
Assy
Disassembly of Scanner
Unit
Printhead
(p.52)
*Using the dedicated tool (upper case
removing tool), the Printhead can be removed
even without removing the Middle Housing.
p.52
(See )
PF Scale and PF Encoder
(p.62)
PF Motor
(p.62)
Upper Paper Guides
Disassembly and Assembly
START
Panel Assy
(p.42)
Scanner Unit
(p.44)
Main Board
(p.45)
Middle Housing
(p.48)
Printer Mechanism
*
(p.55)
I/S Assy
(p.63)
ASF Assy
(p.64)
CR Motor
(p.70)
Carriage Assy
(p.67)
Paper Guide Front Assy
(p.71)
Flowchart 4-1. Disassembly Procedure
*For replacement of the Printer Mechanism Assy, install not only the housings but also
the following parts when installing the new Printer Mechanism Assy.
• Intermediate Gear (26.5)
• PF Encoder Scale
• PF Motor (p.62)
• ASF Assy (p.64)
• Printhead (p.52)
• Head Harness Assy
Printhead
*
(p.52)
Linear Scale
(p.54)
Power Supply Board
(p.56)
APG Assy
(p.65)
(p.66)
Overview
(p.62)
(p.62)
(p.69)
Waste Ink Tray Assy
(p.51)
Stacker Assy Waste Ink Pads
(p.57)
Eject Frame Assy
(p.69)
Revision A
(p.56)
41