Battery Charge - Panasonic KX-TG4381NZ Operating Instructions Manual

TG43xxNZ(e)_OI.book Page 14 Tuesday, August 26, 2008 1:58 PM
Preparation

Battery charge

Place the handset on the base unit or
charger for about 7 hours before
initial use.
L While charging, "Charging" is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged, "Charge
completed" is displayed.
Base unit: Charger
*1 KX-TG4382/KX-TG4392
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
14
Battery level
Battery icon
5
6
7
8
*1
:
Note:
L KX-TG4381/KX-TG4382
The batteries need to be charged if
the handset beeps while you are
engaged in a call.
L KX-TG4391/KX-TG4392
The batteries need to be charged if
the handset beeps while you are
engaged in a call or operating the
answering system remotely.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
In continuous
use
Not in use
(standby)
While using the
clarity booster
feature (page
19)
Note:
L Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
Battery level
High
Medium
Low
L When flashing:
Needs to be
charged.
Empty
Operating time
5 hours max.
11 days max.
3 hours max.