Programmed Play - Durabrand CD-916 Operating Instructions Manual

PROGRAMMED PLAY

The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Program Number
Track Number (song number)
During programming, the symbol PROG flashes in the display. To program songs to
play in your preferred order, follow steps below:
1.Press the PROGRAM button.
PROGRAM
The symbol PROG and "
in the display.
PROG
Program number
2.Press the SKIP/SEARCH button (
or ) to s ele c t t rac k nu mber 3
(example). PROG and the track number
"03" will flash in the displa
SKIP
SEARCH
PROG
Track number
IB-CD916(CDR79AD-60J8)-WM-E-010805.pmd
Programming Example:
1 2 3
3 5 8
3.Press the PROGRAM button to confirm.
Track 3 is now programmed.
Program number 2 will now show in the
display, ready for your next selection
of the track.
" will flash
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5.After programming is finished, press
PLAY/PAUSE to begin programmed
play. The symbol "PROG" changes to be
steadily on in the display, and music
begins.
y.
NO TE:
- The player will stop automatically after
al l pr ogra mmed tr ac k s hav e be en
played.
- To quit programmed play, pres s the
STOP/OFF button once. Then you may
press PLAY/PAUSE button to restart
normal play.
Your programmed memory w ill be
lost:
•
When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
•
When the power is off or the CD door
is opened.
7
8
4 5 6 7
1 2 4 1
PROG
PLAY
PAUSE
IB-CD916(CDR79AD-60J8)-WM-E-010805
2/23/2005, 11:49 AM
etc.
8
etc.
1