Connecting To Home Stereo Systems - Durabrand CD-916 Operating Instructions Manual

CONNECTING TO HOME STEREO SYSTEMS

The LINE OUT jack is made to accept a stereo mini plug (3.5mm). Simply connect
the cable's mini plug to the LINE OUT jack on your player, and the other appropriate
end usually RCA JACKS to the CD/AUX INPUTS of your home stereo.
LINE OUT
YOUR HOME STEREO
PLASTIC PLUG
REMOVE TO EXPOSE THE JACK
FOR HOME STEREO CONNECTIONS.
NOTE 1:
Use the volume control of your stereo system to adjust the volume because the
VOLUME button on this player has no effect on the output level when used with the
LINE OUT jack.
NOTE 2:
To insure that the headphones are not accidentally put into the LINE OUT jack, we
have covered this jack with a plastic plug. You may leave this small plug in the LINE
OUT jack for normal headphone use. To connect your CD player to your home
stereo, simply grasp this plug with your fingernails, and remove it to expose the LINE
OUT jack.
NOTE 3:
If you plug the headphones into the LINE OUT jack, the music may be very low even
if the VOLUME control is at maximum.
Make sure you plug the headphones into the green PHONES jack only.
IB-CD916(CDR79AD-60J8)-WM-E-010805.pmd
PHO N ES
3
4
DC IN 4.5V
OPTIONAL
AC ADAPTOR
IB-CD916(CDR79AD-60J8)-WM-E-010805
2/23/2005, 11:49 AM