Table of Contents
Advertisement
Internet Router User Guide
Olivetti PG304
Samsung MyLaser-4
Samsung MyLaser-5
Samsung MyLaser-6
Problem 3
The Banner Page does not print properly.
Solution 1
If you have a Windows GDI printer, the Banner Page can
NOT function properly.
Disable the Banner printing in the Configure Port screen.
I am using a PostScript printer and I enabled the Banner
Problem 4
option in the Configure PrintServer dialogue box. But when I
print, I get either garbage or nothing at all.
Solution 4
If you are using a Post Script printer and enabled the banner
option, you must also enable the PostScript option.
Problem 5
When printing from some software applications such as
Power Point, printing is very slow and contains errors.
Solution 5
The problem is caused because the printer is configured to
Start printing after first page is spooled. To change the
configuration, do the following:
1. Go to Control PanelÔPrinters and click on your printer.
2. Select FileÔPropertiesÔDetails.
3. When the Details screen appears, click the Spool Set-
4. When the Spool Settings dialogue box appears, choose
68
NEC SuperScript series
tings button.
Start printing after last page is spooled and click OK.
Advertisement
Table of Contents
