Table of Contents
Advertisement
Chapter 3
Printer Sharing
This Chapter explains how to share the printer attached to the
Internet Router INET-830 and INET-850.
Overview
To have shared access to the printer connected to the Internet Router INET-830 and
INET-850, each PC requires the following:
<
Printer port software supplied with the INET-830 and INET-850 must be
installed and configured.
<
The Windows Printer Driver for the printer attached to the INET-830 and
INET-850 must be installed and configured.
These procedures are detailed in the following sections.
Note that no additional Internet Router configuration is required. However, it must
have a valid IP Address and Network Mask, and be recognized as a valid device on
your LAN.
The printer driver software supplied works with the following operating systems:
<
Windows 95 and 98
<
Windows NT 3.51
<
Windows NT 4.0
Software Installation
1. Run the SETUP program on the supplied floppy disk.
2. Select the desired installation directory.
3. Complete the installation as normal. Reboot your system when setup is com-
plete.
4. The Setup program will add the following files to your system:
3
25
Advertisement
Table of Contents
