Filter Care - Bosch GS60 Instructions For Use Manual

de de en
● Switch off the appliance.
● Pull out the mains plug.
● Tug the power cord briefly and then let go (the power
cord retracts automatically).
● Unlock the telescopic tube by moving the sliding
switch in the direction of the arrow and slide one
tube into the other.
When putting the appliance away after use, you can use
parking aid on the underside.
● Stand the appliance upright by the hose.
● Slide the hook on the floor tool into the recess on the
underside of the appliance.
If you have put your appliance away and stored it in the
upright position, you should take hold of it by the suc-
tion adapter to lift it up or reposition it.
In order to achieve good vacuuming results, the dust con-
tainer should be emptied after every use or, at the latest,
when dust or dirt is visible on the fluff filter.
When emptying the dust container, always check how
dirty the fluff filter is and clean it as required as detailed
in the "Cleaning the fluff filter" instructions.
● Fold up the carrying handle, unlock the dust container
by folding up the hand grip and take the dust contai-
ner out of the appliance.
Release the filter unit of the dust container by pres-
sing the release button.
Take the filter unit out of the dust container and
empty the dust container.
Insert the filter unit into the dust container, making
sure it is correctly seated.
Push the release button back into its original position
until it clicks into place, in order to ensure that the
container has been closed properly.
When re-inserting the dust container into the applian-
ce, make sure it is correctly seated.
Fold back the hand grip to lock the dust container in
position in the vacuum cleaner.
16
Filter
Your appliance is equipped with a "Sensor Control" Fun-
ction.
monitors whether your vacuum cleaner is achieving its
optimum power level. The indicator light lets you know
when you need to clean the plate filter, so that the vacu-
um cleaner can reach its optimum power level once
more.
The indicator lights up blue when the appliance is wor-
king at its optimum level. Once the indicator flashes red,
the plate filter must be cleaned. The appliance is auto-
matically adjusted back to the lowest power setting.
● Switch the appliance off in order to clean the plate fil-
ter.
● To clean the plate filter, turn the knob at least three
times 180° clockwise.
You can also clean the filter if the suction is becoming
less powerful, even if the indicator has not lit up.
We recommend that you clean the plate filter before
25
emptying the dust container. It must be cleaned at the
latest when the "Sensor Control" indicator lights up:
If the indicator flashes three times in quick succession,
even though the plate filter has been cleaned, this is
probably due to a dirty fluff filter. In this case, the appli-
ance automatically adjusts to the lowest power setting
and the indicator lights up red permanently.
● Switch the appliance off, empty the dust container
and clean the fluff filter according to the instructions
in "Cleaning the fluff filter".
The indicator lights up blue when the appliance is wor-
king at its optimum level. Once the indicator turns red
and flashes, the appliance switches off automatically
Filter cleaning is activated and performed by the inte-
grated cleaning motor.
If the appliance cleans three times in quick succession,
this is probably due to a dirty fluff filter. In this case, the
appliance automatically adjusts to the lowest power set-
ting and the indicator lights up red.
● Switch the appliance off, empty the dust container
and clean the fluff filter according to the instructions
in "Cleaning the fluff filter".
This function constantly
2 22
25
25