Troubleshooting - Durabrand CD-1493 Operating Instructions Manual

TROUBLE SHOOTING
Problem
The power is not on.
There is no sound.
" " appears in the display
even when a CD is in place.
CD does not play.
The sound drops out.
CD does not play while radio may
continue to play.
The sound is weak or has poor
quality.
The RECORD button does not
function/The tape does not play.
The tape does not erase
completely.
The tape does not record.
Tape jamming or tangling.
The sound is weak/The sound
quality is poor.
Cassette PLAY button pops up.
Remedy
•
Insert the AC plug into a wall outlet securely.
•
Mak e s u r e th e b a t te r i e s a re i n s tal l e d
correctly and they are fresh.
•
Make sure the FUNCTION switch is at the
right position as you want.
•
Adjust the volume.
•
Insert the CD with the label side up.
•
Make sure that the CD compartment is closed.
•
Clean the CD.
•
Take out the CD and leave the CD DOOR open for
about an hour to dry moisture condensation.
•
Make sure the FUNCTION switch is at CD
position.
•
Clean the CD, or replace it if the CD is badly
damaged.
•
Place the player in a location free from vibration.
•
Check if your batteries are fresh.
•
It is normal since the radio uses less power than the
CD player.
•
Replace all the batteries with new ones if they are
weak, or bring the set near a window, or rotate the
set.
•
Make sure the safety tab on the cassette is
in place.
•
Make sure the FUNCTION switch is at TAPE
position.
•
Clean the erasing head.
•
Replace all the batteries with new ones if they are
weak.
•
Make sure the tape is inserted properly.
•
Make sure the safety tab of the cassette is in place.
•
Use only better quality tapes.
•
Do not use a cassette with more than 90 minutes.
•
Make sure there are no loose layers of tape visible
before inserting the cassette.
•
Clean the heads, pinch roller and capstan.
•
The tape has reached its end. Remove it, flip to the
other side and re-insert.
19
IB-CD1493(AD-63E)-WM-E-030404