Canon optura Xi Instruction Manual page 99

Recording from Digital Video
Devices (DV Dubbing}
You can record from other digital video devices equipped with a DV terminal with
virtually no loss in picture and sound quality.
-
a
When recording from digital video devices, make sure that" AV .. DV" is not
displayed on the screen. If "AV" DV" is displayed, change the setting
(OJ 102).
a
Anomalous signals sent from the connected device may be recorded as
anomalous picture (although it may not appear so on the screen), or it may not
be recorded at all.
a
Copyright protected signals cannot be recorded.
a
Blank sections may be recorded as anomalous picture.
a
If the picture does not appear, reconnect the DV cable or turn the camcorder
off and back on again.
a
You can only record signals from devices with the
I)~
logo recording in SD
system in SP or LP format.
a
You can connect only one device with the DV cable.
a
You can use the camcorder for playback and recording without reconnecting
the DV cable.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected Device: Play back the tape.
6. Press the
~/II
button when the scene you wish to
record appears.
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device (OJ 97).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
"DV IN" appears.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
7. Press the. button to stop recording.
• Press the
~1I1
button to pause recording.
• Press the
~1I1
button again to restart recording.
8. Connected Device: Stop playback.
99