Canon optura Xi Instruction Manual page 159

Message Explanation
Paper error
There is a problem with the paper.
No Paper Paper is not correctly inserted or there is no paper.
Paper Jam
The paper jammed during printing.
Paper has been
Paper size has been changed between print setting and start
changed
of printing.
Incompatible paper
You attempted to print on paper that cannot be used with
size
the camcorder.
Media type error
You attempted to use a paper size/type that is not
supported by the printer.
Ink error
There is a problem with the ink cassette.
Ink Cassette Error
There is a problem with the ink cassette.
No Ink The ink cartridge is not inserted or is out of ink.
Paper and ink do not The ink cannot be used with the selected paper type.
match
Low ink level The ink cartridge needs to be replaced soon.
Waste tank full Waste tank is full. Refer to the instruction manual of your
printer.
File error You attempted to print an image that was made with
another camcorder, has a different format, or was edited on
a computer.
Cannot Print!
You attempted to print an image that was made with
another camcorder, has a different format, or was edited on
a computer.
Could not print X
You attempted to use the print order settings to print X
images
images that were made with another camcorder, have a
different format or were edited on a computer.
Set print order
You attempted to print an image from the CARD PLAY (VCR)
menu [-+ {"') PRINn without having set the print order.
Cannot trim
You attempted to trim an image with an image size of 160 x
120, or an image not recorded in the 4:3 ratio.
Readjust trimming
You changed the print style after you set the trimming
settings.
Printer error
Turn off the printer and turn it back on.
Recharge the printer
The printer battery is depleted.
battery
Communication Error
The printer is experiencing a data transmission error.
Printer in use
The printer is in use. Check the printer status.
Printer warming up
Printer is warming up. If the message does not disappear
after a few seconds, check the printer status.
Paper lever error
Paper lever error occurred. Adjust the paper selection lever
to the proper position.
Printer cover open
Close the printer cover securely.
No printhead No print head is installed in the printer.
-
159